轧浆辊英语怎么说及英文单词

⑴ 色浆的英语单词是什么

从用途上来分
调色机用的色浆叫做：colorants
工厂，车间人工用色浆叫做：Dispersions，即颜料分散体的意思

⑵ 形容东西一闪一闪 bulinbulin的 英文单词是什么，英译中文的词是什么

形容东西一闪一闪的英文单词，译为闪亮的，发光的。

读音：英['ʃaɪni]美['ʃaɪni]

其原形为shine，shine的基本意思是“照耀”“发光”,指太阳、灯等发光体发出光亮,也可指物体反射出光亮,还可指用手电筒等的光向某方向照射。引申可作“表现突出,出众”解。其过去式和过去分词都是shone。

在美式英语中shine还可作“擦”解,表示把某物擦亮、磨光或使之发亮,其过去式和过去分词都是shined,不是shone。

shine作“发光”解时是不及物动词,作“擦亮”解时是及物动词。用作及物动词时接名词或代词作宾语。

例句：

I am amazed to see a beggar step into a shiny Mercedes.

看到一个乞丐跨进一辆闪亮的奔驰轿车我惊愕不已。

The genie gave her a big, shiny ruby.

精灵给她一颗又大又闪亮的红宝石。

(2)轧浆辊英语怎么说及英文单词扩展阅读：

shine, light up两者都有“发光”“照亮”的意思。其区别在于:

1、shine是不及物动词,指太阳等能发亮的主体自身发光; 而light up则是及物动词,意思是“照亮…”。例如:

The sun shines bright in my old Kentucky home.

明媚的阳光照耀着我古老的肯塔基故乡。

All the streets were lit up with electricity.

所有街道上灯火通明。

2、shine和light up均可用于比喻,指“眼睛亮”,但前者强调状态,后者强调由不亮到亮的变化。例如:

Her eyes shone with pleasure.

她的眼睛里闪烁着愉快的光芒。

Her eyes lit up when I mentioned a holi- day.

当我提到去度假时,她的双眼顿时亮了起来。

⑶ 辊道的英语翻译 辊道用英语怎么说

辊道是在轧机上往复轧制及轧后输送到精整工序等的设备，应该是在一个平台（table）上工作，所以可翻译为 rollers table，其工作的路径是 roller-way。

⑷ 处理单词用英语怎么说

处理
[词典来] handle; manage; deal with; dispose;
[例句]对她身源上的伤口和淤伤进行了处理和治疗。
She was treated for cuts and bruises.

⑸ 请教轧辊磨床相关专业英语词汇

工件床身来 Workpiece lathe bed
砂轮床身 Grinding Wheel lathe bed
砂轮主轴源 grinding ore wheelspindle
头架 head frame
尾架 tail stand
中心架 center rest
磨架 grinding frame
轧辊软着陆装置 roller soft landing device
测量系统 measurement system
曲线磨削系统 curve grinding system the
主轴精压系统 main axle fine pressure system

真不简单，尽量找了~

⑹ 求轧辊使用说明书，英文版的。

Mill rolls operating manual
1. Roll should prevent any damage ring transportation.
2. Roll should be stored in a dry, ventilated room to avoid damp，surface should be covered with rust preventive oil.
3. Before using, should wipe the oil, dirt and rust on surface and then doing conventional inspection, especially carefully check the roll body and roll neck surface in case of defects like nick, indentation, pitting, and crack. Those defective rolls are not allowed to use.
4. Before going into use roll quality card shall be established, register roll number, specification, size and related inspection results, then filed those original records.
5. Installation should be careful enough to avoid scratch or bruising on roll surface.
6. Quality of bloom should be carefully checked before rolling, rolling process operation should be strictly obeyed while rolling in order to avoid overload rolling.
7. The hot roll can not accumulate on the wet and cold ground, collision between rolls should be avoided.
8. Establish a roll change grinding system, allocate reasonable roll change cycle, matched with corresponding nondestructive test method (bow wave, magnetic powder, ultrasonic etc), complementary with hardness testing to decide reasonable grinding quantity and grinding process.
9. During grinding on work roll, every time the minimum quantity should grind off the tired layer, the layer depth is usually of 0.15-0.30 mm.
After worked times later support roll need to clean the burr and tired layer thoroughly (the layer depth is usually of 2-5mm), to prevent flaking and make corresponding truing of roll body chamfering.
During roll grinding, should also pay attention to the difference of matching roll’s diameter to meet the design requirements.
10. While installed new roll (including new grinded roll, roll disuse for a period), it should be preheated while rolling with rapid speed, bandwidth and large rolling rection.
11. The grinded roll need to guard against rust, and prohibited to place on the ground.
12. Record the grinding quantity after each grinding, the rolling steel NO., specifications, rolling quantity, grinding reason (such as normal roll change, different specifications roll change, scratch, peel, sticky steel, crack, etc.).
Should select the roll with fitted hardness, convexity and roughness according to rolling material, using frequency, rolling rection, rolling speed etc.. The principle to use roll is: the new (high hardness) roll is suitable for broadband and thin belt finishing rolling; Old (low hardness) roll applies to the thick and narrowband beginning rolling. Roll must implement the principle of extension, avoid misuse and blend. Finishing roll can not be used as roughing roll.
Roll neck need have good lubrication and cool-off, prevent overheating to damage the surface. Check mechanical components, prevent the roll’ abnormal invalidation caused by accidents of equipment.
While rolling roll should be cool-off and lubricating enough, prevent the decline of hardness and crack caused by overheating.
Rolling should be clean, prevent deflection, folded or mixed with something wrong, prevent corrosion procts embedded into metal.
Regular maintenance, inspection and monitoring to avoid taking "disease" equipment operation、over-term service. Pay attention about shock, ensure roll working in a good condition.

⑺ 英语单词橡皮怎么说

rubber音标：英 [ˈrʌbə(r)] 美 [ˈrʌbər]

释义：

1、n.橡胶;橡皮;黑板擦;(某些纸牌游戏或体育运动中相同的对手或队伍间)多轮决胜负的比赛

Ifplasticandrubberareburnt,they'llgiveoffpoisonousgases.

要是塑料和橡胶被焚，就会放出有毒的气体。

2、adj.橡胶制成的

.

早期汽车的轮胎是用铁实心橡胶制成的。

相关短语：

1、crude rubber 天然橡胶,未加工橡胶,粗橡胶

2、impoverished rubber 失去弹性的橡皮

3、natural rubber 天然橡胶

4、raw rubber 生胶

5、synthetic rubber 人造橡胶,合成橡胶

(7)轧浆辊英语怎么说及英文单词扩展阅读：

复数： rubbers

派生词： rubber adj.

词语用法：

n. (名词)

1、 rubber的基本意思是“橡胶”,也可指“合成橡胶”,是物质名词,不可数。

2、 rubber也可转变为个体名词而表示擦铅笔或墨水痕迹的“橡皮”,多用在英式英语里,在美国作eraser,是可数名词。

3、 rubber还可作“黑板擦”解,是可数名词。

4、 rubber的复数形式rubbers可作“橡胶套鞋”解。

⑻ 轧线轧辊用英语怎么说

轧线轧辊
Rolled roll
轧辊roller; roll; bowl; mill roll